WhatOil logo WHAT OIL
  • Milyen motorolaj kell az autóba?
  • HU
    • EN
    • LT
    • ES
    • HU

CSA7153 motorral szerelt járművek listája:

  • MG - MG3 1.5 (80kW) 2013–2015
  • MG - MG3 1.5 (78kW) 2016–2017
  • MG - MG-ZS 1.5 (78kW) 2017–2017
  • MG - MG3 1.5 Euro 6 (78kW) 2018–2025
  • MG - MG-ZS 1.5 GPF (78kW) 2018–2019
  • MG - MG-ZS 1.5 GPF (78kW) 2020–2025

Ajánlott motorolaj a motorhoz CSA7153 motor leggyakoribb problémái, tünetei és javítási megoldásai.

Kérdezd meg a MI-t bármely motorkódról
Csak motorkódokkal kapcsolatos kérdések (márka/modell/motortípus/gyártási évek).
Oil Specs Comparison
Castrol Magnatec 5W‑30 A5
Castrol Magnatec 5W‑30 A5
SAE 5W‑30✔
ACEA A1/B1 / A5/B5✔
API SN/CF✔
ILSAC GF‑4 / GF‑5✔
Ford WSS‑M2C913‑A / B / C / D✔
Liqui Moly Special Tec F 5W‑30
Liqui Moly Special Tec F 5W‑30
SAE 5W‑30✔
ACEA A5/B5✔
API SN✔
ILSAC GF‑5✔
Ford WSS‑M2C913‑A / B / C / D✔
Mobil Super 3000 Formula F 5W‑30
Mobil Super 3000 Formula F 5W‑30
SAE 5W‑30✔
ACEA A1/B1 / A5/B5✔
API SN✔
ILSAC GF‑5✔
Ford WSS‑M2C913‑A / B / C / D✔
MPM 05000F 5W‑30 Premium Synthetic Ford
MPM 05000F 5W‑30 Premium Synthetic Ford
SAE 5W‑30✔
ACEA A5/B5✔
API SN✔
ILSAC GF‑4 / GF‑5✔
Ford WSS‑M2C913‑A / B / C / D✔
Olajspecifikációk jelmagyarázata
✔ – Megfelel az előírt specifikációnak
❓ – Nincs kifejezetten feltüntetve (óvatosan: ellenőrizd a jármű kézikönyvét)
❌ – Nem felel meg az előírt specifikációnak. Használata motorproblémákat okozhat.

A választ az MI generálta.

Motorolaj-specifikációk CSA7153 motor

SAE 5W-30
ACEA C3
API SN
ILSAC GF-5

A CSA7153 motor.

Engine CSA7153

Symptoms:
- Rough idling and occasional stalling
- Reduced engine power and acceleration hesitation
- Increased fuel consumption
- Check Engine Light (CEL) illumination
- Unusual engine noises such as knocking or ticking

Diagnosis:
- Inspect ignition system components including spark plugs and coils for wear or damage
- Perform a fuel system check for clogged injectors or fuel filter issues
- Scan for diagnostic trouble codes (DTCs) using an OBD-II scanner to identify sensor faults
- Check for vacuum leaks or intake manifold gasket deterioration
- Evaluate the condition of the exhaust gas recirculation (EGR) system and gasoline particulate filter (GPF) where applicable
- Assess timing chain tension and camshaft timing for irregularities

Fixes:
- Replace worn or fouled spark plugs and faulty ignition coils
- Clean or replace fuel injectors and fuel filter to restore proper fuel delivery
- Repair or replace faulty sensors such as oxygen sensors or mass airflow sensors as indicated by DTCs
- Seal vacuum leaks and replace intake manifold gaskets if necessary
- Service or clean the EGR valve and GPF to prevent clogging and maintain emissions compliance
- Adjust or replace timing chain components if timing issues are detected
- Regular oil changes with manufacturer-recommended grade to prevent engine wear and maintain performance

Prevention:
- Adhere strictly to scheduled maintenance intervals, including spark plug and fuel filter replacement
- Use high-quality fuel and engine oil to reduce deposits and wear
- Periodically inspect and clean the air intake and EGR systems to avoid clogging
- Monitor engine performance and promptly address any warning lights or unusual symptoms
- Avoid prolonged idling and aggressive driving to reduce stress on engine components
- Ensure timely servicing of the GPF system to maintain emission standards and engine efficiency
© 2025 Copyrights: WHAT OIL

* The engine oils listed on this website are general recommendations based on publicly available data. For the most accurate and suitable oil type for your vehicle, always refer to your car's owner manual or technical documentation. Oil specifications may vary depending on engine version, production year, driving conditions, and other factors. If in doubt, consult your vehicle manufacturer or a certified mechanic.