WhatOil logo WHAT OIL
  • Milyen motorolaj kell az autóba?
  • HU
    • EN
    • LT
    • ES
    • HU

2VZ-FE motorral szerelt járművek listája:

  • TOYOTA - Camry 2.5i (118kW) 1988–1991

Ajánlott motorolaj a motorhoz 2VZ-FE motor leggyakoribb problémái, tünetei és javítási megoldásai.

Kérdezd meg a MI-t bármely motorkódról
Csak motorkódokkal kapcsolatos kérdések (márka/modell/motortípus/gyártási évek).
Oil Specs Comparison
Castrol MAGNATEC 10W‑40 A/B
Castrol MAGNATEC 10W‑40 A/B
SAE 10W‑40✔
ACEA A3/B4✔
API SP✔
MB‑Approval 226.5/229.3✔
Renault RN0700 / RN0710✔
VW 501 01 / 505 00✔
Fiat 9.55535‑D2✔
Wolf GuardTech 10W‑40 B4
Wolf GuardTech 10W‑40 B4
ACEA A3/B4✔
API SN✔
MB‑Approval 229.1❓
Renault RN0700 / RN0710✔
VW 501 01 / 505 00✔
Fiat 9.55535‑D2✔
Champion Active Defence 10W‑40 B4
Champion Active Defence 10W‑40 B4
ACEA A3/B4✔
API SN✔
MB‑Approval 229.1❓
Renault RN0700 / RN0710✔
VW 501 01 / 505 00✔
Fiat 9.55535‑D2✔
MPM Part Synthetic 10W‑40
MPM Part Synthetic 10W‑40
ACEA A3/B4✔
API SN/CF✔
MB‑Approval 229.3❓
Renault RN0700 / RN0710✔
VW 501 01 / 505 00✔
Fiat 9.55535‑D2✔
Olajspecifikációk jelmagyarázata
✔ – Megfelel az előírt specifikációnak
❓ – Nincs kifejezetten feltüntetve (óvatosan: ellenőrizd a jármű kézikönyvét)
❌ – Nem felel meg az előírt specifikációnak. Használata motorproblémákat okozhat.

A választ az MI generálta.

Motorolaj-specifikációk 2VZ-FE motor

SAE 10W-30
API SJ

A 2VZ-FE motor.

Engine 2VZ-FE

Symptoms:
- Rough idling or stalling
- Loss of power or poor acceleration
- Engine overheating
- Excessive oil consumption or leaks
- Check engine light illumination

Diagnosis:
- Inspect for vacuum leaks around intake manifold and hoses
- Check timing belt condition and alignment; worn or slipped belts cause rough running
- Test coolant system for leaks and thermostat operation to address overheating
- Examine valve cover gasket and oil seals for leaks
- Use OBD or scan tool to read fault codes related to ignition or fuel injection
- Perform compression test to assess cylinder health

Fixes:
- Replace worn or damaged timing belt and tensioner to restore proper timing
- Repair or replace leaking gaskets and seals to prevent oil loss
- Flush and refill coolant; replace thermostat and radiator hoses if faulty
- Clean or replace idle air control valve to stabilize idle
- Replace faulty ignition components such as spark plugs, coils, or wires
- Address vacuum leaks by replacing cracked hoses or intake manifold gaskets

Prevention:
- Follow recommended maintenance intervals for timing belt replacement (typically every 90,000 km or 60,000 miles)
- Regularly check and maintain coolant levels and condition to prevent overheating
- Use quality engine oil and change it at specified intervals to reduce wear and leaks
- Inspect vacuum lines and gaskets periodically for signs of deterioration
- Keep ignition system components clean and replace spark plugs as per schedule
- Monitor engine performance and address issues promptly to avoid further damage

-NO INFO-
© 2025 Copyrights: WHAT OIL

* The engine oils listed on this website are general recommendations based on publicly available data. For the most accurate and suitable oil type for your vehicle, always refer to your car's owner manual or technical documentation. Oil specifications may vary depending on engine version, production year, driving conditions, and other factors. If in doubt, consult your vehicle manufacturer or a certified mechanic.