Engine code

Vehicles using B47C20O/U/1 engine list:

Which cars use the B47C20O/U/1 engine and what oil to use. Common B47C20O/U/1 engine faults, symptoms, diagnosis, prevention and repair.

Recommended oil for engine B47C20O/U/1 engine.

Ask AI about any Engine code
Questions strictly about engine codes (brand/model/engine type/production years).
Oil Specs Comparison
Castrol EDGE 5W-30 LL
Castrol EDGE 5W-30 LL
SAE 5W-30 βœ”
ACEA C3 βœ”
VW 504.00/507.00 βœ”
MB 229.31/229.51 βœ”
Porsche C30 βœ”
BMW Longlife-04 βœ”
Dexos2 βœ”
View on Amazon!
Motul 8100 5W-30 X-Clean
Motul 8100 5W-30 X-Clean
SAE 5W-30 βœ”
ACEA C3 βœ”
VW 504.00 / 507.00 βœ”
MB 229.31 / 229.51 βœ”
Porsche C30 βœ”
BMW Longlife-04 βœ”
GM dexos2 ❌
View on Amazon!
RAVENOL VMP 5W-30
RAVENOL VMP 5W-30
SAE 5W-30 βœ”
ACEA C3 βœ”
VW 504.00 / 507.00 βœ”
MB 229.51 βœ”
Porsche C30 βœ”
BMW Longlife-04 βœ”
GM dexos2 βœ”
View on Amazon!
Pennzoil Platinum Euro Full Synthetic 5W-30
Pennzoil Platinum Euro Full Synthetic 5W-30
SAE 5W-30 βœ”
ACEA C3 βœ”
VW 504.00 / 507.00 βœ”
MB 229.31 / 229.51 βœ”
Porsche C30 βœ”
BMW Longlife-04 βœ”
GM dexos2 βœ”
View on Amazon!
Oil specification key
βœ” – Meets the required specification
❓ – Not explicitly stated (use caution; check your vehicle manual)
❌ – Does not meet required specification. Use may cause engine issues.
As an Amazon Associate, we may earn from qualifying purchases.

Answer generated by AI.

Oil specifications for B47C20O/U/1 engine

SAE 0W-30
ACEA C3
BMW Longlife-04

Most common problems, symptoms & fixes for the B47C20O/U/1 engine.

Engine B47C20O/U/1

Symptoms:
- Rough idling and loss of power during acceleration
- Excessive smoke from the exhaust, particularly black or blue smoke
- Engine warning light (MIL) illumination on the dashboard
- Unusual noises such as knocking or rattling from the engine bay
- Increased fuel consumption and reduced overall performance

Diagnosis:
- Check for common diesel particulate filter (DPF) clogging or malfunction, as these engines are prone to DPF issues due to soot accumulation.
- Inspect the high-pressure fuel pump and injectors for wear or failure, which can cause misfires and poor combustion.
- Perform a compression test to rule out cylinder wear or valve issues.
- Scan the engine control unit (ECU) for fault codes related to turbocharger performance, EGR valve faults, or sensor malfunctions.
- Examine the timing chain and tensioner for signs of wear or elongation, as premature timing chain issues have been reported.

Fixes:
- Clean or replace the diesel particulate filter if clogged; forced regeneration or DPF replacement may be necessary.
- Replace faulty fuel injectors or high-pressure fuel pump components to restore proper fuel delivery.
- Repair or replace the timing chain and tensioner to prevent engine damage and restore timing accuracy.
- Address EGR valve faults by cleaning or replacing the valve to reduce emissions and improve combustion.
- Update ECU software if available to improve engine management and address known issues.

Prevention:
- Use high-quality diesel fuel and perform regular fuel system maintenance to reduce injector and pump wear.
- Follow recommended oil change intervals with manufacturer-approved lubricants to protect engine components.
- Drive the vehicle regularly at higher RPMs to allow proper DPF regeneration and avoid soot buildup.
- Schedule periodic inspections of the timing chain and related components, especially after 100,000 km.
- Keep the engine and intake system clean to prevent sensor faults and maintain optimal performance.