Engine code
Vehicles using R9M 408 engine list:
Which cars use the R9M 408 engine and what oil to use. Common R9M 408 engine faults, symptoms, diagnosis, prevention and repair.
- RENAULT - Trafic III 1.6 dCi 90 DPF (66kW) 2014–2015
- RENAULT - Trafic III 1.6 dCi 115 DPF (84kW) 2014–2015
Recommended oil for engine R9M 408 engine.
Ask AI about any Engine code
Questions strictly about engine codes (brand/model/engine type/production years).
| Castrol GTX 5W-30 C4 | |
|---|---|
| ACEA C4 | ✔ |
| MB-Approval 226.51 | ✔ |
| Renault RN0720 | ✔ |
| Mobil Super 3000 Formula R 5W-30 | |
|---|---|
| ACEA C4 | ✔ |
| MB-Approval 226.51 | ✔ |
| Renault RN0720 | ✔ |
| Motul Specific 0720 5W-30 C4 | |
|---|---|
| ACEA C4 | ✔ |
| MB-Approval 226.51 | ✔ |
| Renault RN0720 | ✔ |
| Granville FS-R 5W-30 | |
|---|---|
| ACEA C4 | ✔ |
| MB-Approval 226.51 | ✔ |
| Renault RN0720 | ✔ |
Oil specification key
✔ – Meets the required specification
❓ – Not explicitly stated (use caution; check your vehicle manual)
❌ – Does not meet required specification. Use may cause engine issues.
✔ – Meets the required specification
❓ – Not explicitly stated (use caution; check your vehicle manual)
❌ – Does not meet required specification. Use may cause engine issues.
As an Amazon Associate, we may earn from qualifying purchases.
Answer generated by AI.
Oil specifications for R9M 408 engine
ACEA C4
API SN
SAE 5W-30
RN0720
Most common problems, symptoms & fixes for the R9M 408 engine.
Engine R9M 408
Symptoms:
- Loss of power and reduced engine performance
- Excessive smoke from the exhaust, often black or blue
- Engine warning light (MIL) illuminated on the dashboard
- Rough idling or stalling, especially when cold
- Increased fuel consumption
- Difficulty starting the engine
Diagnosis:
- Check for fault codes using an OBD-II scanner, focusing on EGR, DPF, and turbocharger-related codes
- Inspect the Diesel Particulate Filter (DPF) for clogging or regeneration failure
- Test the EGR valve for proper operation and carbon buildup
- Examine the turbocharger for shaft play, leaks, or damage
- Verify fuel system pressure and injector operation
- Inspect the intake and intercooler for blockages or leaks
Fixes:
- Clean or replace the DPF if clogged; perform forced regeneration if applicable
- Clean or replace the EGR valve to restore proper exhaust gas recirculation
- Repair or replace the turbocharger if damaged or leaking
- Replace faulty fuel injectors or repair the fuel system as needed
- Reset the engine control unit (ECU) after repairs to clear fault codes
- Use high-quality fuel and additives to help maintain injector and combustion chamber cleanliness
Prevention:
- Regularly service the vehicle according to manufacturer intervals, including oil and filter changes
- Use recommended fuel and oil grades to prevent deposits and wear
- Avoid frequent short trips that prevent the DPF from reaching regeneration temperature
- Periodically drive at higher engine speeds to facilitate DPF regeneration
- Monitor dashboard warnings and address issues promptly to avoid damage escalation
- Keep the air intake system clean and free from debris to ensure proper airflow
Symptoms:
- Loss of power and reduced engine performance
- Excessive smoke from the exhaust, often black or blue
- Engine warning light (MIL) illuminated on the dashboard
- Rough idling or stalling, especially when cold
- Increased fuel consumption
- Difficulty starting the engine
Diagnosis:
- Check for fault codes using an OBD-II scanner, focusing on EGR, DPF, and turbocharger-related codes
- Inspect the Diesel Particulate Filter (DPF) for clogging or regeneration failure
- Test the EGR valve for proper operation and carbon buildup
- Examine the turbocharger for shaft play, leaks, or damage
- Verify fuel system pressure and injector operation
- Inspect the intake and intercooler for blockages or leaks
Fixes:
- Clean or replace the DPF if clogged; perform forced regeneration if applicable
- Clean or replace the EGR valve to restore proper exhaust gas recirculation
- Repair or replace the turbocharger if damaged or leaking
- Replace faulty fuel injectors or repair the fuel system as needed
- Reset the engine control unit (ECU) after repairs to clear fault codes
- Use high-quality fuel and additives to help maintain injector and combustion chamber cleanliness
Prevention:
- Regularly service the vehicle according to manufacturer intervals, including oil and filter changes
- Use recommended fuel and oil grades to prevent deposits and wear
- Avoid frequent short trips that prevent the DPF from reaching regeneration temperature
- Periodically drive at higher engine speeds to facilitate DPF regeneration
- Monitor dashboard warnings and address issues promptly to avoid damage escalation
- Keep the air intake system clean and free from debris to ensure proper airflow