WhatOil logo WHAT OIL
  • What oil for my car
  • EN
    • EN
    • LT
    • ES
    • HU

Vehicles using UZAM 331 engine list:

  • MOSKVICH - 21412-01 (53kW) 1986–2001

Recommended oil for engine UZAM 331 engine.

Ask AI about any Engine code
Questions strictly about engine codes (brand/model/engine type/production years).
Oil Specs Comparison
Castrol MAGNATEC 10W-40 A3/B4
Castrol MAGNATEC 10W-40 A3/B4
SAE 10W-40✔
ACEA A3/B3✔
ACEA A3/B4✔
API SN✔
Fiat 9.55535-D2✔
MB-Approval 226.5✔
Renault RN0700✔
Renault RN0710✔
VW 501 01✔
VW 505 00✔
Shell Helix HX7 10W-40
Shell Helix HX7 10W-40
SAE 10W-40✔
ACEA A3/B3✔
ACEA A3/B4✔
API SN✔
Fiat 9.55535-D2❓
MB-Approval 226.5❓
Renault RN0700✔
Renault RN0710✔
VW 501 01❌
VW 505 00✔
Total Quartz 7000 10W-40
Total Quartz 7000 10W-40
SAE 10W-40✔
ACEA A3/B3❓
ACEA A3/B4✔
API SN✔
Fiat 9.55535-D2❌
MB-Approval 226.5❓
Renault RN0700❌
Renault RN0710❌
VW 501 01✔
VW 505 00✔
Valvoline MaxLife 10W-40
Valvoline MaxLife 10W-40
SAE 10W-40✔
ACEA A3/B3❓
ACEA A3/B4✔
API SN✔
Fiat 9.55535-D2✔
MB-Approval 226.5❓
Renault RN0700✔
Renault RN0710✔
VW 501 01❌
VW 505 00✔
Oil specification key
✔ – Meets the required specification
❓ – Not explicitly stated (use caution; check your vehicle manual)
❌ – Does not meet required specification. Use may cause engine issues.

Answer generated by AI.

Oil specifications for UZAM 331 engine

SAE 10W-40
API SJ

Most common problems, symptoms & fixes for the UZAM 331 engine.

Engine UZAM 331

Symptoms:
- Engine overheating during prolonged use
- Rough idling and poor acceleration
- Excessive oil consumption and smoke from the exhaust
- Difficulty starting, especially in cold weather
- Unusual knocking or tapping noises from the engine

Diagnosis:
- Check coolant levels and radiator condition for leaks or blockages causing overheating
- Inspect spark plugs and ignition system for fouling or wear leading to rough idling
- Examine piston rings and valve seals for wear causing oil burning and smoke
- Test battery and starter motor function for starting issues
- Listen for abnormal engine noises to identify worn bearings or valve train problems

Fixes:
- Flush and replace coolant; repair or replace radiator and thermostat as needed to resolve overheating
- Replace spark plugs, distributor cap, rotor, and ignition wires to restore smooth running
- Overhaul engine components such as piston rings and valve seals to reduce oil consumption and smoke
- Service or replace battery and starter motor to improve cold starts
- Adjust valve clearances and replace worn bearings or timing components to eliminate knocking noises

Prevention:
- Regularly check and maintain coolant levels and radiator condition to prevent overheating
- Perform routine ignition system maintenance including spark plug replacement every 10,000-15,000 km
- Change engine oil and filter frequently to reduce wear on piston rings and valves
- Use quality fuel and keep the fuel system clean to avoid starting problems
- Conduct periodic valve clearance adjustments and listen for unusual engine sounds to catch issues early

By following these diagnostic steps and maintenance practices, owners of vehicles equipped with the UZAM 331 engine can minimize common problems and extend engine life.
© 2025 Copyrights: WHAT OIL

* The engine oils listed on this website are general recommendations based on publicly available data. For the most accurate and suitable oil type for your vehicle, always refer to your car's owner manual or technical documentation. Oil specifications may vary depending on engine version, production year, driving conditions, and other factors. If in doubt, consult your vehicle manufacturer or a certified mechanic.