WhatOil logo WHAT OIL
  • What oil for my car
  • EN
    • EN
    • LT
    • ES

Vehicles using DZMA engine list:

  • SKODA - Kodiaq I 2.0 TSI RS 4x4 (180kW) 2021–2024
  • VW - Tiguan 2.0 TSI 4Motion PF (180kW) 2020–2024
  • VW - Tiguan Allspace 2.0 TSI 4Motion PF (180kW) 2021–2025

Recommended oil for engine DZMA engine.

Ask AI about any Engine code
Questions strictly about engine codes (brand/model/engine type/production years).
Oil Specs Comparison
Castrol EDGE 0W‑20 LL IV
Castrol EDGE 0W‑20 LL IV
ACEA C5/C6✔️
VW 508 00/509 00✔️
Porsche C20✔️
BMW LL‑17 FE+✔️
MB 229.71/229.72✔️
Ford WSS‑M2C956‑A1✔️
RAVENOL USVO® DXG 0W-20
RAVENOL USVO® DXG 0W-20
ACEA C5✔️
VW 508 00/509 00✔️
Porsche C20✔️
BMW LL‑17 FE+✔️
MB 229.71 / 229.72✔️
Ford WSS‑M2C956‑A1✔️
Mobil 1 ESP x2 0W‑20
Mobil 1 ESP x2 0W‑20
ACEA C5/C6✔️
VW 508 00/509 00✔️
Porsche C20✔️
MB 229.71✔️
Ford WSS‑M2C956‑A1✔️
GM dexosD✔️
Liqui Moly Top Tec 6200 0W‑20
Liqui Moly Top Tec 6200 0W‑20
ACEA C5✔️
VW 508 00/509 00✔️
Porsche C20✔️
Ford WSS‑M2C956‑A1✔️
Oil specification key
✔️ – Meets the required specification
❓ – Not explicitly stated (use caution; check your vehicle manual)
❌ – Does not meet required specification. Use may cause engine issues.

Answer generated by AI.

Oil specifications for DZMA engine

SAE 0W-20
ACEA C3
API SN Plus
VW 508.00
VW 509.00

Most common problems, symptoms & fixes for the DZMA engine.

Engine DZMA

Symptoms:
- Rough idling or hesitation during acceleration
- Check Engine Light (CEL) illumination
- Reduced fuel efficiency
- Occasional misfires or loss of power
- Increased oil consumption or minor leaks

Diagnosis:
- Perform a thorough OBD-II scan to identify specific fault codes related to ignition, fuel system, or emissions
- Inspect ignition coils and spark plugs for wear or damage, as these are common failure points
- Check for carbon buildup on intake valves, which can cause rough running and misfires in direct injection engines like the DZMA
- Examine the turbocharger system for boost leaks or actuator faults
- Inspect PCV (Positive Crankcase Ventilation) system for clogging or malfunction, which can lead to increased oil consumption
- Verify fuel injectors’ condition and spray pattern to ensure proper combustion

Fixes:
- Replace faulty ignition coils and worn spark plugs to restore smooth engine operation
- Clean intake valves using walnut blasting or chemical cleaners to remove carbon deposits
- Repair or replace any leaking hoses or faulty turbocharger components to maintain proper boost pressure
- Service or replace the PCV valve to prevent oil leaks and maintain crankcase pressure
- Replace or clean fuel injectors if clogged or malfunctioning
- Regular oil and filter changes using manufacturer-recommended grades to prevent premature wear

Prevention:
- Use high-quality fuel and perform regular fuel system cleaning to minimize carbon buildup
- Follow the manufacturer’s maintenance schedule strictly, especially for ignition components and oil changes
- Avoid extended idling and short trips that do not allow the engine to reach optimal operating temperature, reducing deposit formation
- Monitor engine performance and address any CEL warnings promptly to prevent damage escalation
- Use OEM or approved replacement parts to ensure compatibility and reliability

By adhering to these diagnostic steps, fixes, and preventive measures, owners of vehicles equipped with the DZMA engine can maintain reliable performance and longevity.
© 2025 Copyrights: WHAT OIL

* The engine oils listed on this website are general recommendations based on publicly available data. For the most accurate and suitable oil type for your vehicle, always refer to your car's owner manual or technical documentation. Oil specifications may vary depending on engine version, production year, driving conditions, and other factors. If in doubt, consult your vehicle manufacturer or a certified mechanic.