WhatOil logo WHAT OIL
  • What oil for my car
  • EN
    • EN
    • LT
    • ES
    • HU

Vehicles using DW10FCC engine list:

  • PEUGEOT - 508 II 2.0 BlueHDi 160 (120kW) 2018–2021

Recommended oil for engine DW10FCC engine.

Ask AI about any Engine code
Questions strictly about engine codes (brand/model/engine type/production years).
Oil Specs Comparison
Castrol EDGE 5W-30 C3
Castrol EDGE 5W-30 C3
ACEA C3✔
API SN/CF✔
VW 505.00 / 505.01✔
MB 229.31 / 229.51✔
Dexos2✔
Mobil 1 ESP Formula 5W‑30
Mobil 1 ESP Formula 5W‑30
ACEA C3✔
API SN/CF✔
VW 505.00 / 505.01✔
MB 229.31 / 229.51✔
GM dexos2✔
Liqui Moly Top Tec 4600 5W‑30
Liqui Moly Top Tec 4600 5W‑30
ACEA C3✔
API SN/CF✔
VW 505.00 / 505.01✔
MB 229.31 / 229.51✔
GM dexos2✔
Sunoco Ultra Full Synthetic Euro 5W‑30
Sunoco Ultra Full Synthetic Euro 5W‑30
ACEA C3✔
API SN/CF✔
VW 505.00 / 505.01✔
MB 229.31 / 229.51✔
GM dexos2✔
Oil specification key
✔ – Meets the required specification
❓ – Not explicitly stated (use caution; check your vehicle manual)
❌ – Does not meet required specification. Use may cause engine issues.

Answer generated by AI.

Oil specifications for DW10FCC engine

ACEA C5
API SN
SAE 0W-30
PSA B71 2290

Most common problems, symptoms & fixes for the DW10FCC engine.

Engine DW10FCC

Symptoms:
- Loss of power and reduced fuel efficiency
- Rough idling or engine misfires
- Excessive smoke from the exhaust, often black or blue
- Warning lights on the dashboard, such as the check engine light
- Unusual noises from the turbocharger or engine bay

Diagnosis:
- Perform a diagnostic scan to check for fault codes related to the fuel system, turbocharger, or emissions components.
- Inspect the turbocharger for signs of wear, oil leaks, or shaft play.
- Check the diesel particulate filter (DPF) for clogging or regeneration issues.
- Examine the EGR (Exhaust Gas Recirculation) valve for carbon buildup or malfunction.
- Test fuel injectors for proper spray pattern and leaks.
- Inspect the air intake system and intercooler for blockages or leaks.

Fixes:
- Clean or replace the EGR valve to restore proper exhaust gas recirculation.
- Regenerate or replace the DPF if clogged to prevent backpressure and engine performance loss.
- Repair or replace faulty turbochargers to restore boost pressure and engine power.
- Replace worn or leaking fuel injectors to improve combustion efficiency.
- Address any air intake leaks or blockages to ensure proper airflow.
- Regularly update engine control software if manufacturer recalls or updates are available.

Prevention:
- Use high-quality diesel fuel and adhere to recommended service intervals.
- Regularly check and maintain the air filter to prevent dirt ingress.
- Avoid frequent short trips that prevent the DPF from reaching regeneration temperature.
- Follow manufacturer guidelines for oil changes using approved lubricants.
- Periodically inspect turbocharger and EGR components for early signs of wear or clogging.
- Keep the engine software updated to benefit from performance and emissions improvements.
© 2025 Copyrights: WHAT OIL

* The engine oils listed on this website are general recommendations based on publicly available data. For the most accurate and suitable oil type for your vehicle, always refer to your car's owner manual or technical documentation. Oil specifications may vary depending on engine version, production year, driving conditions, and other factors. If in doubt, consult your vehicle manufacturer or a certified mechanic.