Vehicles using CHYE engine list:
Recommended oil for engine CHYE engine.
| Castrol EDGE 0W-40 A3/B4 | |
|---|---|
| ACEA A3/B4 | ✔ |
| API SP | ✔ |
| BMW Longlife-01 | ✔ |
| MB 229.5 | ✔ |
| Porsche A40 | ✔ |
| Renault RN0700/0710 | ✔ |
| VW 502 00/505 00 | ✔ |
| Ford WSS-M2C937-A | ✔ |
| Motul 8100 X‑Max 0W‑40 | |
|---|---|
| ACEA A3/B4 | ✔ |
| API SP | ✔ |
| BMW Longlife‑01 | ✔ |
| MB 229.5 | ✔ |
| Porsche A40 | ✔ |
| VW 502 00 / 505 00 | ✔ |
| Renault RN0700/0710 | ✔ |
| Ford WSS‑M2C937‑A | ✔ |
| Total Quartz 9000 Energy 0W‑40 | |
|---|---|
| ACEA A3/B4 | ✔ |
| API SP | ✔ |
| BMW Longlife‑01 | ✔ |
| MB 229.5 | ✔ |
| Porsche A40 | ✔ |
| VW 502 00 / 505 00 | ✔ |
| Renault RN0700/0710 | ✔ |
| Ford WSS‑M2C937‑A | ✔ |
| Petronas Syntium 7000 0W‑40 | |
|---|---|
| ACEA A3/B4 | ✔ |
| API SP | ✔ |
| BMW Longlife‑01 | ✔ |
| MB 229.5 | ✔ |
| Porsche A40 | ✔ |
| VW 502 00 / 505 00 | ✔ |
| Renault RN0700/0710 | ✔ |
| Ford WSS‑M2C937‑A | ✔ |
Oil specification key
✔ – Meets the required specification
❓ – Not explicitly stated (use caution; check your vehicle manual)
❌ – Does not meet required specification. Use may cause engine issues.
✔ – Meets the required specification
❓ – Not explicitly stated (use caution; check your vehicle manual)
❌ – Does not meet required specification. Use may cause engine issues.
Answer generated by AI.
Oil specifications for CHYE engine
SAE 5W-30
ACEA C3
VW 504.00
VW 507.00
Most common problems, symptoms & fixes for the CHYE engine.
Engine CHYE
Symptoms:
- Rough idling or engine misfire
- Reduced engine power and acceleration
- Increased fuel consumption
- Check Engine Light (CEL) illumination
- Occasional stalling or hesitation during acceleration
Diagnosis:
- Perform an OBD-II scan to retrieve fault codes related to ignition, fuel, or emissions systems.
- Inspect spark plugs and ignition coils for wear or damage, as these are common failure points.
- Check for vacuum leaks around intake manifold and hoses that can cause rough running.
- Test fuel injectors for proper spray pattern and operation.
- Examine the air filter and intake system for blockages or dirt.
- Verify the condition of the mass airflow sensor (MAF) and throttle body for contamination.
- Inspect the timing chain tensioner and guides for wear, as timing issues can cause misfires.
Fixes:
- Replace worn or fouled spark plugs and faulty ignition coils to restore proper combustion.
- Repair or replace damaged vacuum hoses to eliminate leaks.
- Clean or replace the air filter and clean the MAF sensor and throttle body to ensure accurate air measurement.
- Service or replace malfunctioning fuel injectors.
- If timing chain components show wear or noise, replace tensioner and guides promptly to avoid engine damage.
- Reset the ECU after repairs and verify that fault codes do not return.
Prevention:
- Follow the manufacturer’s recommended maintenance schedule for spark plug and air filter replacement.
- Use quality fuel and engine oil to reduce deposits and wear.
- Regularly inspect vacuum lines and intake components for cracks or leaks.
- Keep the engine bay clean to prevent dirt buildup on sensors.
- Address any engine warning lights promptly to avoid escalation of issues.
- Maintain timely oil changes to ensure proper lubrication of timing components and reduce wear.
By adhering to these diagnostic steps and maintenance practices, owners of VW Up 1.0 (44kW) models with the CHYE engine can minimize common issues and maintain reliable engine performance.
Symptoms:
- Rough idling or engine misfire
- Reduced engine power and acceleration
- Increased fuel consumption
- Check Engine Light (CEL) illumination
- Occasional stalling or hesitation during acceleration
Diagnosis:
- Perform an OBD-II scan to retrieve fault codes related to ignition, fuel, or emissions systems.
- Inspect spark plugs and ignition coils for wear or damage, as these are common failure points.
- Check for vacuum leaks around intake manifold and hoses that can cause rough running.
- Test fuel injectors for proper spray pattern and operation.
- Examine the air filter and intake system for blockages or dirt.
- Verify the condition of the mass airflow sensor (MAF) and throttle body for contamination.
- Inspect the timing chain tensioner and guides for wear, as timing issues can cause misfires.
Fixes:
- Replace worn or fouled spark plugs and faulty ignition coils to restore proper combustion.
- Repair or replace damaged vacuum hoses to eliminate leaks.
- Clean or replace the air filter and clean the MAF sensor and throttle body to ensure accurate air measurement.
- Service or replace malfunctioning fuel injectors.
- If timing chain components show wear or noise, replace tensioner and guides promptly to avoid engine damage.
- Reset the ECU after repairs and verify that fault codes do not return.
Prevention:
- Follow the manufacturer’s recommended maintenance schedule for spark plug and air filter replacement.
- Use quality fuel and engine oil to reduce deposits and wear.
- Regularly inspect vacuum lines and intake components for cracks or leaks.
- Keep the engine bay clean to prevent dirt buildup on sensors.
- Address any engine warning lights promptly to avoid escalation of issues.
- Maintain timely oil changes to ensure proper lubrication of timing components and reduce wear.
By adhering to these diagnostic steps and maintenance practices, owners of VW Up 1.0 (44kW) models with the CHYE engine can minimize common issues and maintain reliable engine performance.