Vehicles using UZAM 3313 engine list:
Recommended oil for engine UZAM 3313 engine.
| Castrol GTX 10W‑40 A3/B4 | |
|---|---|
| SAE 10W‑40 | ✔ |
| ACEA A3/B4 | ✔ |
| API SP | ✔ |
| MB‑Approval 226.5 / 229.3 | ✔ |
| Renault RN0700 / RN0710 | ✔ |
| VW 501 01 / 505 00 | ✔ |
| Fiat 9.55535‑D2 | ✔ |
Oil specification key
✔ – Meets the required specification
❓ – Not explicitly stated (use caution; check your vehicle manual)
❌ – Does not meet required specification. Use may cause engine issues.
✔ – Meets the required specification
❓ – Not explicitly stated (use caution; check your vehicle manual)
❌ – Does not meet required specification. Use may cause engine issues.
Answer generated by AI.
Oil specifications for UZAM 3313 engine
SAE 10W-40
API SJ
Most common problems, symptoms & fixes for the UZAM 3313 engine.
Engine UZAM 3313
Symptoms:
- Rough idling and stalling during low RPMs
- Overheating after prolonged use
- Reduced power output and sluggish acceleration
- Excessive oil consumption and smoke from exhaust
- Difficulty starting, especially in cold weather
Diagnosis:
- Check for clogged or dirty carburetor jets causing fuel mixture issues
- Inspect cooling system for leaks, radiator blockages, or faulty thermostat
- Examine spark plugs and ignition timing for wear or misalignment
- Look for oil leaks around valve seals and piston rings indicating wear
- Test battery and starter motor for proper operation during cold starts
Fixes:
- Clean or rebuild the carburetor to restore proper fuel flow and mixture
- Flush the cooling system, replace coolant, and repair any leaks; replace thermostat if faulty
- Replace worn spark plugs and adjust ignition timing to manufacturer specifications
- Repair or replace valve seals and piston rings to reduce oil consumption and smoke
- Service or replace battery and starter components to improve cold start reliability
Prevention:
- Perform regular carburetor maintenance and fuel system cleaning every 10,000 km
- Change coolant and inspect cooling system components annually to prevent overheating
- Replace spark plugs and check ignition system at recommended intervals
- Use quality engine oil and change it regularly to minimize wear on seals and rings
- Keep battery terminals clean and ensure charging system is functioning properly
By following these diagnostic steps and maintenance practices, owners of vehicles equipped with the UZAM 3313 engine can reduce common issues and maintain reliable engine performance over time.
Symptoms:
- Rough idling and stalling during low RPMs
- Overheating after prolonged use
- Reduced power output and sluggish acceleration
- Excessive oil consumption and smoke from exhaust
- Difficulty starting, especially in cold weather
Diagnosis:
- Check for clogged or dirty carburetor jets causing fuel mixture issues
- Inspect cooling system for leaks, radiator blockages, or faulty thermostat
- Examine spark plugs and ignition timing for wear or misalignment
- Look for oil leaks around valve seals and piston rings indicating wear
- Test battery and starter motor for proper operation during cold starts
Fixes:
- Clean or rebuild the carburetor to restore proper fuel flow and mixture
- Flush the cooling system, replace coolant, and repair any leaks; replace thermostat if faulty
- Replace worn spark plugs and adjust ignition timing to manufacturer specifications
- Repair or replace valve seals and piston rings to reduce oil consumption and smoke
- Service or replace battery and starter components to improve cold start reliability
Prevention:
- Perform regular carburetor maintenance and fuel system cleaning every 10,000 km
- Change coolant and inspect cooling system components annually to prevent overheating
- Replace spark plugs and check ignition system at recommended intervals
- Use quality engine oil and change it regularly to minimize wear on seals and rings
- Keep battery terminals clean and ensure charging system is functioning properly
By following these diagnostic steps and maintenance practices, owners of vehicles equipped with the UZAM 3313 engine can reduce common issues and maintain reliable engine performance over time.