WhatOil logo WHAT OIL
  • What oil for my car
  • EN
    • EN
    • LT
    • ES

Vehicles using MDB.CA engine list:

  • PORSCHE - 911 Turbo S (426kW) 2016–2019
  • PORSCHE - 911 Turbo S PF (426kW) 2018–2019

Recommended oil for engine MDB.CA engine.

Oil Specs Comparison
Castrol EDGE 0W-40 A3/B4
Castrol EDGE 0W-40 A3/B4
ACEA A3/B4✔
API SP✔
BMW Longlife-01✔
MB 229.5✔
Porsche A40✔
Renault RN0700/0710✔
VW 502 00/505 00✔
Ford WSS-M2C937-A✔
Motul 8100 X‑Max 0W‑40
Motul 8100 X‑Max 0W‑40
ACEA A3/B4✔
API SP✔
BMW Longlife‑01✔
MB 229.5✔
Porsche A40✔
VW 502 00 / 505 00✔
Renault RN0700/0710✔
Ford WSS‑M2C937‑A✔
Total Quartz 9000 Energy 0W‑40
Total Quartz 9000 Energy 0W‑40
ACEA A3/B4✔
API SP✔
BMW Longlife‑01✔
MB 229.5✔
Porsche A40✔
VW 502 00 / 505 00✔
Renault RN0700/0710✔
Ford WSS‑M2C937‑A✔
Petronas Syntium 7000 0W‑40
Petronas Syntium 7000 0W‑40
ACEA A3/B4✔
API SP✔
BMW Longlife‑01✔
MB 229.5✔
Porsche A40✔
VW 502 00 / 505 00✔
Renault RN0700/0710✔
Ford WSS‑M2C937‑A✔
Oil specification key
✔ – Meets the required specification
❓ – Not explicitly stated (use caution; check your vehicle manual)
❌ – Does not meet required specification. Use may cause engine issues.

Answer generated by AI.

Oil specifications for MDB.CA engine

SAE 0W-40
ACEA C3
API SN
Porsche C40

Most common problems, symptoms & fixes for the MDB.CA engine.

Engine MDB.CA

Symptoms:
- Loss of power or reduced engine performance
- Unusual engine noises such as knocking or rattling
- Check Engine Light (CEL) illumination
- Increased oil consumption or visible oil leaks
- Rough idling or stalling

Diagnosis:
- Perform a full engine diagnostic scan to check for stored fault codes related to ignition, fuel delivery, or turbocharger systems.
- Inspect turbochargers for signs of wear, shaft play, or oil leakage.
- Check ignition coils and spark plugs for wear or failure, common in high-performance engines.
- Examine the cooling system for leaks or blockages that could cause overheating.
- Conduct a compression test to assess cylinder health.
- Inspect for vacuum leaks or intake system issues that can affect air-fuel mixture.

Fixes:
- Replace faulty ignition coils or spark plugs to restore proper combustion.
- Repair or replace turbochargers if excessive shaft play or oil leakage is detected.
- Address oil leaks by replacing gaskets or seals, particularly around the turbocharger and valve covers.
- Flush and refill the cooling system; repair any leaks or replace faulty components such as thermostats or water pumps.
- Clean or replace air filters and intake components to ensure proper airflow.
- Update engine software if manufacturer recalls or technical service bulletins (TSBs) are available to improve engine management.
- Perform regular oil changes with manufacturer-recommended synthetic oil to maintain lubrication and reduce wear.

Prevention:
- Adhere strictly to Porsche’s recommended maintenance schedule, including oil and filter changes.
- Use only high-quality synthetic oils and OEM parts for replacements.
- Avoid aggressive driving when the engine is cold to prevent premature wear.
- Regularly inspect turbocharger and cooling system components for early signs of failure.
- Keep the engine bay clean to prevent debris from damaging sensitive components.
- Ensure software updates are applied promptly to optimize engine performance and reliability.

By following these diagnostic steps and maintenance practices, owners of Porsche 911 Turbo S models with engine MDB.CA can minimize common issues and maintain optimal engine performance.
© 2025 Copyrights: WHAT OIL

* The engine oils listed on this website are general recommendations based on publicly available data. For the most accurate and suitable oil type for your vehicle, always refer to your car's owner manual or technical documentation. Oil specifications may vary depending on engine version, production year, driving conditions, and other factors. If in doubt, consult your vehicle manufacturer or a certified mechanic.